It is hot and humid outside, the air conditioner is running, but the air coming from the vents feels warm. At that moment homeowners often start asking the same question: why is my hvac not blowing cold air?
Homes across Collinsville, Springfield, Peoria, and Bloomington deal with this issue every summer. Sometimes the cause is simple, such as a clogged air filter. Other times the system may have mechanical or airflow problems that need professional service.
Tiger has helped homeowners across Central Illinois restore cooling comfort since 1993. Their licensed HVAC technicians, plumbers, and electricians work together to diagnose problems and keep home systems operating safely and efficiently.
Start Here – Simple Checks Before You Call a Pro
Before scheduling service, homeowners can perform a few quick checks. These simple steps solve a surprising number of cooling problems.
- Verify the thermostat is set to Cool and the fan is set to Auto
- Set the temperature a few degrees below the current room temperature
- Replace a dirty or clogged air filter
- Make sure supply and return vents are open and not blocked by furniture or rugs
- Look at the outdoor unit and make sure it has power and is clear of leaves or debris
- Air filters usually need to be replaced every one to three months during peak cooling season.
Safety is important. Avoid opening electrical panels, removing system covers, or handling refrigerant lines. Those jobs should be handled by a licensed hvac technician.
Most Common Reasons Your HVAC Isn’t Blowing Cold Air
Several issues can prevent an HVAC system from cooling properly.
Dirty or Clogged Air Filter Restricting Airflow
A dirty air filter is the most common cause of poor cooling performance.
When the filter becomes packed with dust and debris, airflow across the evaporator coil drops. Without enough airflow, the system cannot remove heat effectively.
Common signs include:
- Weak airflow from vents
- Longer cooling cycles
- Rooms that cool slowly
Replacing filters regularly and scheduling regular maintenance help prevent this issue.
Thermostat Problems or Incorrect Settings
Thermostat settings can sometimes cause the system to run without cooling.
Incorrect modes, dead batteries, or programming problems may prevent the cooling cycle from starting. If the thermostat is set to Fan On instead of Auto, the system may simply circulate warm air.
If resetting the thermostat does not solve the problem, a hvac technician should inspect the controls and wiring.
Low Refrigerant Levels or a Refrigerant Leak
Refrigerant absorbs heat from inside the home and releases it outside. When levels drop, the system may run but fail to cool effectively.
Refrigerant leaks can also cause:
- Ice forming on refrigerant lines
- Reduced cooling performance
- Rising energy bills
Refrigerant leaks must be repaired by certified professionals who can locate the leak and restore the correct refrigerant level.
Frozen Evaporator Coil
The evaporator coil inside the indoor unit can freeze if airflow becomes restricted or refrigerant levels drop.
When the coil freezes, the system cannot absorb heat from the air.
Homeowners may notice:
- Weak airflow from vents
- Ice on refrigerant lines
- Warm air once the ice begins melting
If ice appears on the system, turn it off and allow it to thaw before scheduling service.
Electrical or Compressor Problems
Electrical components and the compressor are essential for cooling. If the compressor fails to start or electrical components malfunction, the system may run without producing cold air.
Possible warning signs include:
- The outdoor unit not running
- Buzzing or clicking noises
- Breakers repeatedly tripping
These issues require inspection by trained AC technicians.
Less Obvious Issues That Keep Your AC from Cooling
Some cooling problems are harder to identify.
Ductwork problems can allow cooled air to escape before it reaches the vents. Leaks, disconnected ducts, or crushed sections may reduce airflow to certain rooms.
Fan or blower problems can also reduce cooling performance. If the indoor blower motor or outdoor fan is not operating correctly, the system cannot move enough air to remove heat.
Routine inspections and regular maintenance allow technicians to catch these issues early.
When to Call Tiger for AC Not Blowing Cold Air
If simple troubleshooting steps do not restore cooling, it is time to call for professional service.
Schedule service if:
- The thermostat, filter, and vents have been checked but the air is still warm
- Ice forms on refrigerant lines or indoor components
- The outdoor unit does not run when cooling is requested
- The system makes unusual noises or produces burning smells
Tiger serves homeowners across Central Illinois, including Collinsville neighborhoods near Vandalia Street and the World’s Largest Catsup Bottle, Springfield communities such as Historic West Side and Enos Park near the Lincoln Home National Historic Site, and Bloomington areas like South Hill and Hawthorne Hills near Illinois State University.
These Service Areas also extend to nearby communities including East Peoria, Pekin, Dunlap, Morton, Washington, and Chillicothe.
If cooling problems continue, Tiger’s AC technicians can inspect the system and determine what repairs are needed.
Homeowners often choose the Membership program to schedule regular maintenance and reduce the risk of unexpected breakdowns.
Restore Cool Air to Your Home
When your HVAC system runs but does not cool the house, the cause may be simple or it may require professional AC repair. Ignoring the issue can lead to higher energy bills, system damage, or uncomfortable indoor temperatures.
Tiger’s team can inspect the system, identify the cause of the problem, and restore reliable cooling. We also provide emergency AC repair as well.
Contact us today.
Schedule Online(618) 484-9822Homeowners often ask the same question when they see water near their system: why is my hvac leaking water? Across Collinsville, Springfield, Peoria, and Bloomington, this issue often appears during hot weather when air conditioners run for long periods.
You might notice a puddle around the indoor unit, water near a floor drain, or stains on a ceiling below an attic system. Air conditioners create condensation as they remove humidity from the air, but visible leaks usually mean something is wrong.
Tiger has helped homeowners across Central Illinois diagnose and fix HVAC problems since 1993. Their licensed HVAC technicians, plumbers, and electricians work together to identify the cause and prevent water damage or system failure.
Is It Normal for My HVAC to Leak Water?
Air conditioners remove humidity from indoor air while cooling your home. The moisture collects in a drain pan and flows out through a condensate drain line.
Because of this process, a small amount of water is normal.
You may see water dripping from the outdoor drain line or briefly sitting in the drain pan. That indicates the system is removing humidity as designed.
However, standing water near the unit, ceiling stains, or water dripping indoors usually signal a problem.
Question: Is it normal for water to drip from my AC?
Answer: Water draining outside through the condensate line is normal. Water leaking inside typically means a clogged drain line, frozen coil, or another issue that requires attention.
Most Common Reasons Your HVAC Is Leaking Water
Several issues can cause HVAC systems to leak water. Most involve drainage or airflow problems.
Clogged Condensate Drain Line
As the air conditioner runs, condensation collects in a drain pan and exits through a condensate drain line. Over time, algae, dust, and debris can block the line.
When the drain becomes clogged, water backs up and the pan can overflow.
Homeowners may notice:
- Water pooling around the furnace or air handler
- Dripping beneath the indoor unit
- Moisture around the base of the equipment
Routine maintenance usually includes clearing the drain line to prevent this issue.
Dirty Air Filter and Frozen Evaporator Coil
A dirty air filter restricts airflow through the system. When airflow drops, the evaporator coil can freeze.
When the system shuts off, the ice melts quickly and may overflow the drain pan.
Signs of this issue include:
- Weak airflow from vents
- Ice on refrigerant lines or coils
- Water appearing after the system defrosts
Replacing filters regularly helps prevent frozen coils.
Low Refrigerant Levels or a Refrigerant Leak
Low refrigerant pressure can also cause the evaporator coil to freeze. When the ice melts, water may spill from the drain pan.
Refrigerant leaks can also cause weak cooling, unusual sounds, or higher energy bills.
Because refrigerant must be handled by certified professionals, this issue should be evaluated by an HVAC technician.
Cracked or Rusted Drain Pan
Older HVAC systems sometimes have metal drain pans that rust over time. Even newer plastic pans may crack or shift.
When that happens, condensation no longer drains correctly.
Homeowners may notice:
- Water dripping beneath the air handler
- Rust stains around the equipment
- Visible damage to the pan
Replacing the drain pan usually resolves the problem.
Improper Installation or Broken Condensate Pump
Some systems leak because of installation issues. If the condensate line is not pitched properly, water may spill instead of draining away.
Homes with basement systems often rely on a condensate pump. If the pump fails, the pan can overflow.
These issues should be inspected by a hvac technician.
What You Can Safely Check Before Calling Tiger
Homeowners can perform a few simple checks before scheduling service.
- Turn off the system at the thermostat if water is actively leaking
- Replace a dirty air filter
- Check the visible end of the condensate drain line for clogs
- Make sure nothing is blocking airflow around the air handler
If water continues to appear, leave the system off until a professional can inspect it.
When a Leaking HVAC Is an Emergency
Some HVAC leaks require immediate service.
Call for Emergency HVAC services if you notice:
- Water near electrical components
- Ceiling leaks or sagging drywall
- Leaks continuing after changing filters
- Musty odors or visible mold
Water damage can spread quickly through drywall, insulation, and flooring, so prompt service is important.
How Tiger Fixes and Prevents HVAC Water Leaks
When Tiger investigates a leaking system, technicians perform a full inspection.
They check the drain pan, condensate line, evaporator coil, air filters, and pump operation. If needed, they also inspect for refrigerant leaks that may cause freezing.
Technicians may clear drain clogs, repair pumps, replace damaged pans, or correct airflow issues.
Regular maintenance helps prevent leaks by keeping drain lines clear and system components clean.
Tiger serves homeowners and businesses across Central Illinois, including Collinsville neighborhoods near Vandalia Street and the World’s Largest Catsup Bottle, Springfield areas such as Historic West Side and Enos Park near the Lincoln Home National Historic Site, and Bloomington communities like South Hill and Hawthorne Hills near Illinois State University. Our service areas also extend to nearby cities including East Peoria, Pekin, Dunlap, Morton, Washington, and Chillicothe.
Homeowners often join the Membership program to schedule maintenance that helps prevent leaks and other HVAC issues.
If leaks continue, Tiger’s AC technicians can determine whether the system needs repair or possibly a full AC installation. Illinois homeowners rely on for updated cooling equipment.
AC repair may also be necessary to resolve leaks and restore system performance.
Stop HVAC Water Leaks Before They Cause Damage
Water leaking from an HVAC system can damage flooring, drywall, and insulation if it is ignored. If you see water around your system or signs of ongoing condensation problems, it is best to schedule an inspection.
Tiger can locate the source of the leak, repair the problem, and help prevent future issues with proper maintenance.
Schedule Online(618) 484-9822The first 90 degree day hits Central Illinois and many homeowners notice the same problem. The air conditioner that seemed fine in spring is struggling or completely shut down. Families in Collinsville, Springfield, Peoria, and Bloomington often discover their ac not working right when the heat arrives.
Many systems sit mostly unused during spring. Once the first heatwave arrives, the unit runs long cooling cycles and hidden problems show up fast. A system that seemed fine in mild weather suddenly cannot keep up.
Understanding why this happens helps homeowners avoid surprise breakdowns.
How the First Heatwave Exposes Hidden AC Problems
During mild spring weather, air conditioners run only occasionally. Small problems can stay hidden because the system is not under much stress.
When temperatures jump into the 90s, the system suddenly works much harder. The air conditioner must run longer to remove both heat and humidity. Refrigerant pressure rises, electrical components heat up, and airflow becomes critical.
Older systems, especially those between seven and fifteen years old, are often pushed to their limits during this first stretch of extreme heat.
Homeowners usually see two types of problems.
- The system runs constantly but struggles to cool
- The system stops working and blows warm air
Both situations often point to problems that existed before summer arrived.
Signs Your AC Might Not Be Ready for Summer
Several common issues lead to early summer failures. Many start small and become obvious once the heat arrives.
Dirty Filters and Coils Starve the System of Air
Airflow is essential for proper cooling. When filters clog with dust or when a condenser coil becomes covered with dirt and debris, the system cannot move enough air.
Restricted airflow causes overheating and sometimes frozen coils.
Common warning signs include:
- Weak airflow from vents
- Ice on refrigerant lines or indoor coils
- The system running but ac not cooling well when temperatures rise
Changing filters and keeping coils clean can prevent many early summer breakdowns.
Low Refrigerant or a Small Leak Becomes a Big Problem
Refrigerant carries heat out of your home and releases it outside. When levels drop because of ac leaks, the system must work harder to cool.
Small leaks often go unnoticed during mild weather. Once the first heatwave arrives, the system runs longer and cooling performance drops.
Homeowners may notice:
- The system running but ac not cooling properly
- Frozen evaporator coils
- Warm air from vents
Refrigerant problems require professional repair. Licensed AC technicians must locate the leak and recharge the system safely.
Overheated Electrical Components and Capacitors
Electrical parts inside an air conditioner face heavy stress during extreme heat. Capacitors, contactors, motors, and circuit boards operate inside the outdoor cabinet where temperatures rise quickly.
Parts that were already worn often fail during the first hot weekend of summer.
Common signs include:
- Outdoor unit humming but not starting
- Fan not spinning
- Breakers tripping repeatedly
When this happens, many homeowners begin searching for AC repair.
Thermostat and Power Issues
Sometimes the cause of your ac not working is simple. Thermostat settings, dead batteries, or electrical interruptions can prevent the system from starting.
Heatwaves also increase electrical demand across Central Illinois. Power fluctuations can trip breakers or affect thermostat signals.
Homeowners should check a few basics first.
- Confirm the thermostat is set to Cool
- Make sure the set temperature is below the room temperature
- Check the electrical panel for a tripped breaker
If the problem continues, it is time to call a professional.
What Happens When Everyone Turns On Their AC at the Same Time
The first heatwave creates a surge in cooling demand across Central Illinois. Homes and businesses all turn on their air conditioners at once.
This sudden demand places pressure on the electrical grid. Voltage drops or brief outages can occur during extreme heat.
Systems already dealing with airflow problems or ac leaks may shut down when this happens.
Simple Checks Homeowners Can Do Before Calling Tiger
Before scheduling service, homeowners can try a few quick checks.
- Confirm the thermostat is set to Cool and the fan is set to Auto
- Replace a dirty air filter
- Make sure vents are open and unobstructed
- Clear debris from around the outdoor unit
- Check the electrical panel for a tripped breaker
If the breaker trips again or cooling does not improve, professional service is recommended.
Homeowners should not open system panels or attempt refrigerant repairs.
Why Fixing Problems Early Is the Smart Move in Central Illinois
Air conditioners across Central Illinois work hard during long summers.
Waiting for a breakdown during the first heatwave often means long wait times for service.
Preventive maintenance helps by:
- Improving cooling efficiency
- Lowering energy costs
- Extending equipment life
- Reducing emergency repairs
Homeowners across Tiger’s service areas often schedule inspections before summer to avoid sudden failures.
How Tiger Gets Your AC Ready Before the First Heatwave
Tiger has helped homeowners across Central Illinois since 1993. Their licensed HVAC technicians, plumbers, and electricians work together to keep homes comfortable and safe.
During a seasonal inspection technicians:
- Clean the condenser coil
- Check refrigerant levels and inspect for ac leaks
- Test electrical components
- Inspect drains and airflow
If the system is nearing the end of its life, technicians may recommend AC replacement.
Homeowners may also explore financing or join the Membership program to keep their system maintained year-round.
For urgent problems during extreme heat, Tiger also provides emergency hvac services across Central Illinois. For a full list of our service area, check out our location pages.
Schedule Online(618) 484-9822Does plumbing use electricity? The short answer is yes and no. Basic plumbing in many city homes can continue working during a power outage, but several important plumbing components rely on electricity and will stop when the power goes out.
What works and what doesn’t depends on your water source, the type of water heater you have, and whether your home uses electric pumps. Let’s break it down clearly so you know what to expect the next time the lights go out.
Tiger Plumbing, Heating, Air Conditioning & Electrical has been serving Central and Eastern Illinois since 1993. Our licensed plumbers, HVAC technicians, and electricians understand how plumbing and electrical systems work together to protect comfort and safety.
How Plumbing Works Without Electricity in a Typical City Home
In most Illinois cities, water is delivered through municipal systems that rely on large electric pumps and water towers. Water towers use gravity and stored pressure to keep water moving through underground mains.
If your home is on city water, faucets and gravity-flush toilets usually continue to work during a power outage, at least for a while. Even though your home has no power, the pressurized water mains still deliver water unless there is a larger infrastructure issue.
This means that in many homes, you can still run water and flush toilets even when the lights are off.
When Plumbing DOES Use Electricity (And Stops During an Outage)
Several common plumbing systems rely on electricity. These are the parts homeowners often forget about.
Well Pumps and Booster Pumps
If your home uses a private well, you need electricity for water. Well pumps are electric pumps that move groundwater into your home. During a power outage, the pump stops working, and water flow ends once the pressure tank empties.
Some multi-story homes and buildings also use booster pumps to move water to upper levels. Without power, those systems shut down as well.
Electric Water Heaters and Some Gas Water Heaters
Electric tank water heaters stop heating immediately when power is lost. You can still use whatever hot water remains in the tank until it cools.
Gas water heaters are different. Older models with standing pilot lights may continue operating. Newer models often use electronic ignition or power-vent fans, which require electricity. Gas water heaters can therefore stop working during a power outage depending on the model.
Tiger’s water heater services include evaluating which type you have and how it will perform during outages.
Sump Pumps and Sewage/Ejector Pumps
Sump pumps are one of the most critical plumbing components that rely on electricity. When power fails, the sump pump stops instantly.
During heavy Illinois rains or snowmelt, this can increase the risk of basement flooding. Sewage and ejector pumps also stop working without power, which can create wastewater backup risks.
If you rely on a sump pump to protect your basement, backup power solutions are worth discussing.
Smart Plumbing Devices and Leak Detectors
Modern plumbing systems sometimes include smart shutoff valves, leak detectors, and app-connected monitors. These devices typically go offline during a power outage unless they have battery backup.
Manual shutoff valves still function normally. Every homeowner should know where the main water shutoff is located.
Can You Flush Toilets and Use Water When the Power Is Out?
In most city-water homes, yes, you can flush toilets and run faucets during a power outage. Each toilet tank holds enough water for at least one flush.
If needed, you can also pour a bucket of water directly into the toilet bowl to force a flush.
In well-water homes, once the pressure tank empties, water stops flowing until power returns. During longer outages, it is smart to conserve water and limit use if your system depends on electric pumps.
Plumbing Risks During a Power Outage (And How to Reduce Them)
Power outages can create plumbing risks beyond inconvenience.
Common concerns include:
- Basement flooding if sump pumps lose power
- Sewage backup in homes that rely on ejector pumps
- Frozen pipes in winter if heating systems shut down
To reduce risk:
- Consider battery backup or generator installations for sump and ejector pumps
- Limit water use if your system depends on pumps
- In winter, keep cabinet doors open and allow a slight drip in vulnerable pipes if freezing is a concern
Long-term reliability comes from preparation, not reaction.
Why Homeowners in Illinois Call Tiger for All of Their Plumbing Needs
Since 1993, Tiger Plumbing, Heating, Air Conditioning & Electrical has supported families across Central and Eastern Illinois. Our licensed plumbers understand how plumbing, heating, and electrical systems interact during a power outage.
We provide:
- Sump pump repair and installation
- Backup pump systems
- Water heater services
- Whole-home plumbing inspections
- Electrical and generator evaluations
Homeowners across Central and Eastern Illinois count on our team, and if a project ends up being larger than expected, financing options can help you move forward.
If you want to make sure your home is prepared for the next power outage, contact us today to schedule a plumbing readiness inspection.
Schedule Online(618) 484-9822Gas lines are part of your home’s plumbing system, and yes, many licensed plumbers are trained and authorized to work on them. In Illinois, gas piping must meet strict safety codes, and homeowners should always verify that the contractor performing the work is properly licensed and insured.
In this article, we will explain when plumbers handle gas work, what services they provide, who to call in an emergency, and why permits and inspections matter. We will also show how Tiger Plumbing, Heating, Air Conditioning & Electrical supports homeowners with safe, code-compliant gas line solutions.
Tiger has been serving Central and Eastern Illinois since 1993. Our team includes licensed plumbers, HVAC technicians, and electricians who understand how plumbing, heating, and gas systems connect to protect your home.
Yes, Many Plumbers Work on Gas Lines
Gas lines are piping, just like water lines. The difference is that natural gas and propane require tighter safety standards, testing, and inspection.
In Illinois, gas line work must follow state and local building codes, along with utility requirements. Not every handyman or general contractor is legally allowed to perform this work.
That is why homeowners should choose licensed plumbers with specific experience in gas piping. At Tiger, our team handles gas line installation, upgrades, and leak detection using approved materials and inspection processes.
What Kind of Gas Line Work Can a Plumber Do?
A qualified gas plumber can perform a range of services related to natural gas and propane systems.
This includes:
- Installing new gas lines for stoves and cooktops
- Connecting gas dryers
- Running lines for fireplaces and gas logs
- Installing outdoor grill and fire pit lines
- Repairing corroded or leaking natural gas piping
- Replacing outdated black iron lines
- Rerouting lines during remodels or appliance relocations
Gas line installation Illinois homeowners request often involves adding new appliances or upgrading capacity. Proper pipe sizing and pressure testing are essential for safe performance.
A natural gas plumber also evaluates BTU load to ensure the system can support added equipment.
When You Should Call a Plumber vs. the Gas Utility
It helps to understand where the gas utility’s responsibility ends and yours begins.
In most cases:
- The utility company maintains lines up to the meter.
- Homeowners are responsible for gas piping inside the property line and inside the home.
If you smell gas or suspect a major carbon monoxide leak, leave the home immediately. Avoid switches or electronics. Call 911 and the gas utility emergency line first.
For non-emergency situations, such as adding appliances or addressing minor leaks, contacting professional gas line plumbers is the correct step.
If the issue is urgent but not life-threatening, you may also need Emergency services from a licensed contractor who can respond quickly.
Signs You May Need a Plumber for Gas Line Service
Gas systems rarely fail without warning. Watch for these signs:
- A sulfur or rotten egg smell near appliances
- Hissing sounds near gas connections
- Rusted or corroded gas piping
- Appliances with weak or irregular flames
- Pilot lights that repeatedly go out
Never attempt to tighten fittings or repair gas lines yourself. Even a small mistake can create serious safety risks.
Professional gas line repair includes proper testing and inspection before restoring service.
Why Gas Line Work in Illinois Is Not a DIY Project
Gas piping must meet strict state and local standards. Incorrect sizing, improper materials, or poorly sealed joints can create fire hazards or carbon monoxide exposure.
Code-compliant work typically involves:
- Approved materials such as black iron or properly bonded CSST
- Correct pipe sizing based on BTU demand
- Secure support and spacing
- Pressure testing before activation
Improper work can also void insurance coverage or fail municipal inspection.
A licensed gas plumber understands these requirements and follows inspection procedures carefully.
Why Central & Eastern Illinois Homeowners Choose Tiger for Gas Line Work
Tiger Plumbing, Heating, Air Conditioning & Electrical is a veteran-owned, family-operated company with more than 30 years of experience. Since 1993, we have served homeowners across our service areas with safe and reliable plumbing and HVAC solutions.
Our licensed team:
- Performs Gas line installation and Gas line repair
- Handles Gas heating repair connections for furnaces and boilers
- Coordinates gas piping for water heaters, fireplaces, and generators
- Follows Illinois inspection and permitting requirements
Because gas systems connect directly to heating and appliances, our plumbing and HVAC teams work together to ensure safe operation throughout your home.
We also offer financing for larger projects, helping families move forward safely when upgrades or replacements are needed.
If you need a quote for new gas piping or suspect a problem with existing gas lines, contact us today. Our team can schedule an inspection and provide clear next steps for safe, code-compliant service.
Schedule Online(618) 484-9822If your HVAC fan seems like it never shuts off, you are not imagining it. An HVAC fan can run nonstop for several reasons, and not all of them mean something is broken. Sometimes it is a simple thermostat setting. Other times, it points to a control issue, airflow restriction, or system strain during extreme Illinois weather.
In this guide, we will walk through the most common causes, simple checks you can try, and when it makes sense to call Tiger Plumbing, Heating, Air Conditioning & Electrical for a professional diagnosis.
Tiger has been serving Central and Eastern Illinois since 1993. Our licensed HVAC technicians, plumbers, and electricians understand how heating, cooling, ductwork, and electrical controls work together to keep your home comfortable and safe.
Normal vs. Problem: When a Constant Fan Is Actually Okay
In some homes, running the fan more often is intentional. Setting the thermostat fan to “On” instead of “Auto” keeps air circulating even when heating or cooling is not actively running.
This can help:
- Even out hot and cold spots
- Improve filtration
- Reduce stale air
If your temperature stays steady and your energy bills are reasonable, an always-running fan may simply reflect your chosen comfort settings. The key is knowing it is intentional, not the result of a malfunction.
Common Problems That Make an HVAC Fan Run Nonstop
If the fan runs constantly even when set to “Auto,” it is time to look deeper.
Faulty Thermostat or Incorrect Programming
A faulty thermostat is one of the most common reasons a fan will not shut off. If the system ignores thermostat changes, the display glitches, or the fan runs even after the temperature is satisfied, the thermostat may be sending a continuous signal.
A failed relay, bad temperature sensor, or wiring issue can cause the command to stick. If changing the setting from “On” to “Auto” does not stop the blower motor running, a technician should test the thermostat and connections.
Fan Relay or Control Board Issues
Inside your furnace or air handler is a control board that tells the fan when to turn on and off. If a relay sticks or the board malfunctions, power may continue flowing to the fan even after heating or cooling stops.
This is not a DIY repair. Electrical components require proper testing and replacement by a licensed HVAC technician.
If the fan in ac unit runs constantly without cooling, that can also point to internal control problems.
Airflow Problems and Dirty Filters
Restricted airflow can make your system run longer than normal. A severely clogged filter, blocked return vent, or dirty coils can cause the system to struggle reaching the thermostat setpoint.
When that happens, the blower motor running continuously may be a symptom of the system trying to catch up.
Start with these checks:
- Replace the air filter
- Make sure supply and return vents are open
- Remove obstructions near vents
If the problem continues, a deeper inspection may be needed. In some cases, Air Duct Services can help address underlying airflow restrictions.
System Size and Extreme Illinois Weather
Illinois summers and winters can be demanding. An undersized system may run almost constantly just to maintain temperature during peak conditions.
Poor insulation, leaky ductwork, or excessive air leaks can also cause near-constant fan operation. If your system struggles year after year, Tiger can evaluate system sizing, ductwork, and overall performance.
Simple Checks You Can Do Before Calling an HVAC Company
Before scheduling service, try these safe steps:
- Confirm the fan is set to “Auto,” not “On”
- Check that the thermostat temperature is realistic
- Replace a dirty filter
- Make sure all vents are open and unobstructed
- Review smart thermostat fan circulation settings
If your HVAC fan still runs nonstop after these steps, professional troubleshooting is the next step.
Is It Bad if My HVAC Fan Runs All the Time?
It depends on the cause.
In some cases, it is a comfort preference. However, nonstop fan operation can increase utility costs and add wear to the blower motor.
If constant operation is tied to control board issues, airflow restrictions, or electrical problems, ignoring it can shorten equipment life.
If you notice related issues, including radiator fan not working properly in certain heating configurations, schedule an inspection soon.
When to Call Tiger Plumbing, Heating and Cooling
Contact Tiger if:
- The fan runs continuously even when set to Auto
- The system cycles oddly, with fan on but no heating or cooling
- Energy bills increase unexpectedly
- Your HVAC keeps freezing
- You hear unusual noises from the air handler
- If your hvac is making loud noises and you need emergency assistance
Tiger Plumbing, Heating, Air Conditioning & Electrical is veteran-owned and family-operated, serving Central and Eastern Illinois since 1993. Our team handles heating services, AC repair, furnace repair, and complete HVAC diagnostics.
Homeowners across Central and Eastern Illinois count on our team, and when a repair goes beyond what you planned for, financing can help you move forward.
If your HVAC fan will not shut off and you are unsure why, contact us today to schedule an inspection. A clear diagnosis now helps protect comfort and system longevity. We also provide maintenance plans for long term peace of mind.
Schedule Online(618) 484-9822HVAC carbon monoxide concerns are real. A malfunctioning gas furnace or other fuel-burning equipment can release carbon monoxide into your home. It is a colorless, odorless gas, and that is what makes it dangerous.
When everything is installed correctly and maintained properly, your HVAC system vents combustion gases safely outdoors. Problems start when a component fails, venting becomes blocked, or the system has not been serviced in a while.
Tiger Plumbing, Heating, Air Conditioning & Electrical has been serving Illinois homeowners since 1993. Our licensed HVAC technicians, plumbers, and electricians work together to make sure your systems operate safely, not just efficiently.
What Is Carbon Monoxide and How Does Your HVAC Create It?
Carbon monoxide forms when fuel like natural gas does not burn completely. You cannot see it or smell it, which is why it can build up without warning.
Any fuel-burning appliance produces carbon monoxide during normal operation, including:
- Gas furnaces
- Boilers
- Gas water heaters
- Gas fireplaces
An HVAC system that includes a gas furnace creates carbon monoxide as part of combustion. The system is designed to send that exhaust outside through flue pipes.
A central air conditioner does not create carbon monoxide. However, if a furnace carbon monoxide issue develops, the blower and ductwork can circulate contaminated air throughout the home.
How Can a Faulty HVAC Unit Release Carbon Monoxide?
Carbon monoxide leaks usually happen because something inside the system is worn out, damaged, or blocked.
Cracked Heat Exchanger in Your Furnace
The heat exchanger keeps combustion gases separate from the air that flows through your vents. Over time, metal can weaken from heat and corrosion. If cracks form, a carbon monoxide leak can allow exhaust gases to mix with the air moving through your home.
This is one of the most serious furnace problems because the crack may not be visible from the outside.
Blocked or Damaged Flue and Vent Pipes
Flue pipes carry exhaust gases outdoors. If they are blocked, rusted, disconnected, or improperly installed, gases can back up into living spaces.
Common causes include:
- Bird nests
- Debris buildup
- Loose vent connections
- Corroded sections of pipe
This is why annual inspections matter, especially before winter.
Improper Installation or DIY Changes
Incorrect gas pressure, loose venting connections, or improper slope on exhaust pipes can increase the risk of incomplete combustion.
Heating equipment should always be installed and adjusted by licensed professionals. Small setup mistakes can create larger safety issues later.
Poor Maintenance and Dirty Burners
When burners become dirty or safety controls fail, combustion can become incomplete. That increases carbon monoxide production.
Routine heating services help keep burners clean, venting clear, and safety switches operating as designed.
Can Your Air Conditioner Release Carbon Monoxide?
A typical electric air conditioner does not produce carbon monoxide. However, if CO from a furnace or water heater builds up in a basement or mechanical room, your HVAC system can move that air through the ductwork.
This is why both heating services and AC repair should include checks that ensure airflow and ventilation are functioning correctly.
Warning Signs of a Possible Carbon Monoxide Problem
Carbon monoxide does not have a smell. You cannot rely on scent alone.
Equipment or Home Clues
- Yellow or flickering burner flames instead of steady blue
- Rusted or loose vent pipes
- Frequent furnace shutdowns
- Excess condensation around windows
- A system that struggles to stay running
Health Symptoms in People
- Headaches or dizziness
- Nausea
- Confusion
- Flu-like symptoms that improve when leaving the home
- Multiple family members or pets feeling sick at the same time
If you suspect a carbon monoxide leak, leave the home immediately and contact emergency services.
How to Help Prevent Carbon Monoxide Leaks from Your HVAC
Most CO issues are preventable with routine care.
- Schedule an annual furnace safety inspection before the heating season
- Install carbon monoxide detectors on every level of your home
- Keep furnace and water heater vents clear
- Avoid using ovens or unvented heaters for heating
- Call for service if your system behaves differently than usual
Joining Tiger’s Membership program helps ensure your equipment is checked regularly. Maintenance reduces wear and helps catch problems early.
If you believe your system is unsafe, contact us for Emergency hvac services right away.
Why Illinois Homeowners Trust Tiger for CO and Furnace Safety
Tiger Plumbing, Heating, Air Conditioning & Electrical has been serving Central and Eastern Illinois since 1993. We are veteran-owned and family-operated, with licensed professionals across HVAC, plumbing, and electrical trades.
Our team understands how systems work together. A furnace issue can affect airflow. Electrical controls affect safety. Ductwork influences how air moves through your home. We look at the full picture.
We serve families throughout Central and Eastern Illinois, and if a repair ends up being more than you planned for, financing options are available.
If you have concerns about carbon monoxide or your heating system has not been inspected recently, contact us today. A professional safety check provides clarity and helps ensure your home stays comfortable and safe.
Schedule Online(618) 484-9822Mold is one of those problems homeowners worry about for good reason. It affects air quality, comfort, and peace of mind. A common question that comes up during inspections and service calls is this: can HVAC system cause mold inside a home? The short answer is yes, under the right conditions. HVAC systems do not create mold on their own, but they can contribute to growth when moisture and airflow problems are present.
Understanding how mold forms, where HVAC systems fit into the picture, and what steps help reduce risk can make a big difference in protecting your home.
How Mold Grows in Illinois Homes
Mold needs three things to grow: moisture, warmth, and a food source. Illinois homes often provide all three, especially during humid seasons or temperature swings.
Moisture is the biggest factor. High humidity, condensation, or standing water create the environment mold needs. Warm indoor temperatures help it spread, and common materials like dust, insulation, and drywall give it something to grow on. Once conditions are right, mold can develop quickly and spread through the air.
Common HVAC Related Causes of Mold Growth
HVAC systems play a major role in controlling moisture and airflow. When something goes wrong, HVAC mold problems can develop.
Excess Moisture and Condensation
Air conditioners naturally produce condensation as they cool the air. If that moisture is not managed properly, it can collect inside the system or nearby surfaces. Over time, damp areas can lead to mold in HVAC system components, especially around coils and drain pans.
Clogged or Improperly Drained Condensate Lines
Condensate lines are designed to carry moisture away from the system. When they clog or drain incorrectly, water can back up and overflow. Standing water creates a prime environment for mold growth and can contribute to ongoing HVAC mold problems if left unaddressed.
Dirty Evaporator Coils and Air Filters
Dust and debris on coils and filters trap moisture and organic material. This combination increases the risk of mold in HVAC system parts and allows spores to circulate once airflow resumes. Air conditioner mold often starts in these hard to see areas.
Signs of Mold in an HVAC System
Mold is not always visible right away. Many homeowners notice signs before they ever see growth.
Common warning signs include:
- Musty or earthy odors when the system runs
- Visible mold near vents or registers
- Increased allergy or respiratory symptoms indoors
- Unexplained humidity or dampness
- Dust buildup that returns quickly after cleaning
These symptoms often point to mold in HVAC system components or moisture issues that need attention.
Is Mold in an HVAC System Dangerous?
Mold spores circulating through ductwork can affect indoor air quality. For some people, exposure can trigger allergy symptoms, headaches, or breathing discomfort. Long term exposure can be especially concerning for children, older adults, or anyone with respiratory conditions.
Air conditioner mold can also spread beyond the HVAC system into walls, ceilings, and insulation. Addressing HVAC mold problems early helps limit both health concerns and property damage.
How to Prevent Mold Growth in Your Illinois HVAC System
Prevention focuses on moisture control, airflow, and routine care. Small steps taken consistently reduce the chance of mold development.
Helpful prevention practices include:
- Changing air filters on a regular schedule
- Keeping condensate lines clear and draining properly
- Scheduling professional HVAC inspections
- Managing indoor humidity levels
- Cleaning coils and system components as needed
Many HVAC mold problems stem from skipped maintenance. Keeping the system clean and balanced goes a long way toward prevention.
When to Call a Professional for HVAC Mold Issues
If you suspect mold, professional evaluation is important. DIY cleaning may address surface issues, but it often misses hidden moisture problems. Mold in HVAC system components usually signals an underlying issue that needs proper diagnosis.
Professionals can inspect drainage, airflow, and system performance to identify why moisture is building up. They can also recommend safe cleaning or sanitizing steps without spreading spores through the home.
Why Homeowners Trust Tiger
Tiger Services has been helping Illinois homeowners since 1993. Their licensed HVAC technicians, plumbers, and electricians understand how systems interact and how moisture issues in one area can affect the whole home.
Homeowners in Collinsville, Springfield, Bloomington, and Peoria trust Tiger for clear communication, careful inspections, and solutions focused on long term comfort and safety. The goal is not a quick fix, but lasting protection against issues like mold.
Protect Your Illinois Home
If you are concerned and asking can HVAC system cause mold in your home, a professional inspection can provide clarity and peace of mind. Mold risks increase when moisture issues are ignored, but they are manageable with the right approach. If you need more proactive service, Tiger Services offers a membership program where our specialists come to your home on a scheduled basis to ensure your HVAC system is free from mold.
Contact Us Today
Contact us today to schedule an HVAC inspection with Tiger Services. Our experienced team can identify moisture concerns, address HVAC mold problems, and help protect your home’s air quality and comfort. We have several locations all across the state of Illinois to serve your needs. If you are in need of emergency services or need financial assistance for bigger projects, we offer those as well!
Schedule Online(618) 484-9822When an air conditioner or heat pump keeps icing over, it usually points to a breakdown in how the system is operating. Homeowners often notice the ice and start asking why a system meant to control temperature is freezing instead. In most cases, icing is a signal that airflow, refrigerant levels, or another core function is off. These problems are often straightforward to diagnose and address when they’re caught early.
Understanding what causes freezing, what you can safely do right away, and when it is time to call for help can prevent bigger problems and protect your system.
Common Reasons an HVAC System Keeps Freezing
An HVAC system freezes when the temperature inside the unit drops too low or airflow is restricted. Several conditions can lead to this, and many of them are connected.
Some of the most common HVAC freezing causes include:
- Dirty or clogged air filters that restrict airflow
- Low refrigerant levels due to leaks
- Blocked or closed vents limiting air movement
- Dirty evaporator coils
- Blower motor or fan issues
These problems are often tied to ongoing HVAC maintenance issues. When routine upkeep is skipped, small airflow or performance problems can slowly turn into ice buildup.
What to Do When Your HVAC System Freezes in Illinois
If you notice ice forming on your system, there are a few safe steps you can take before calling a professional. Acting quickly helps limit damage.
First, turn the system off. This allows the ice to melt and prevents further strain on the equipment. Next, check your air filter. If it looks dirty, replace it. Then make sure vents are open and not blocked by furniture or rugs.
These steps do not fix the root cause, but they can help stabilize the system. Frozen HVAC repair often requires more than a quick adjustment, especially if freezing keeps coming back.
Can Repeated Freezing Damage Your HVAC System?
Yes, repeated freezing can cause serious problems. Ice buildup forces the system to work harder than it should. Over time, this extra stress can damage the compressor, reduce efficiency, and shorten the lifespan of the unit.
Ignoring the issue can also lead to higher energy bills and uneven cooling throughout the home. Many homeowners wait too long because the system still runs after the ice melts, but recurring freezing is a warning sign that should not be ignored.
How Local Conditions in Central Illinois Can Contribute to HVAC Freezing
Homes in Collinsville, Springfield, Bloomington, and Peoria experience wide temperature swings and periods of high humidity. These conditions can increase the risk of freezing, especially during long run times in warmer months.
Humidity adds extra moisture to the air. If airflow is limited or the system is already struggling, that moisture can freeze on the coils. Extended run times also mean the system has less chance to recover between cycles, making underlying HVAC maintenance issues more noticeable.
Local conditions do not cause freezing on their own, but they can make existing problems show up faster.
How to Prevent Your HVAC System From Freezing
Preventing freezing starts with consistent care and attention to airflow. Small habits can make a big difference.
Helpful prevention steps include:
- Changing air filters regularly
- Keeping vents open and unobstructed
- Scheduling routine professional maintenance
- Addressing unusual noises or weak airflow early
- Making sure outdoor units are clear of debris
Many HVAC freezing causes are linked to neglect rather than sudden failure. Regular inspections help catch issues before ice becomes a problem.
When to Call a Professional HVAC Technician
If freezing happens more than once, it is time to call a professional. Replacing filters and opening vents can only go so far. Ongoing freezing often points to refrigerant issues, electrical concerns, or internal component problems that require expert diagnosis.
Frozen HVAC repair is not just about removing ice. It involves finding the reason the system cannot maintain proper temperature and airflow. Licensed technicians have the tools and training to evaluate the entire system and recommend the right fix.
Why Homeowners Trust Tiger
Tiger Services has been helping Illinois homeowners since 1993. Their team includes licensed HVAC technicians, plumbers, and electricians who understand how home systems work together. This full system perspective matters when diagnosing freezing issues, because airflow, electrical components, and mechanical parts all play a role.
Homeowners across Collinsville, Springfield, Bloomington, and Peoria choose Tiger because the focus is on long term performance, not temporary solutions. Clear explanations, transparent pricing, and careful workmanship help homeowners feel confident in their decisions.
Get Your HVAC System Back to Normal
If you are still wondering why does my HVAC keep freezing, a professional evaluation can provide answers and peace of mind. Repeated freezing is not something to live with, and it is rarely something that fixes itself.
Contact Us Today
Contact us today to schedule a professional HVAC inspection with Tiger Services. Our experienced team can diagnose the cause of freezing, complete any needed frozen HVAC repair, and help prevent future HVAC maintenance issues. If you are in need of emergency services or need financial assistance, give us a call. We have several locations across Illinois to better serve you!
Schedule Online(618) 484-9822






